Author name: Neer Savla

If your water treatment plant still relies on an operator walking the floor, reading dials, and manually adjusting dosing pumps on a gut feeling, you’re running a 1990s plant with a 2026 compliance bill. Automation — PLC and SCADA-based control — is how modern ETPs, STPs, RO, and ZLD systems run consistently, document themselves, and […]

If your RO plant, ETP, or STP was commissioned and then left to run on its own, you’re not alone — and you’re also sitting on a risk most plant owners don’t notice until something fails. Membranes foul silently, dosing pumps drift out of calibration, and instrumentation gives false readings long before a visible breakdown.

Every industrial facility, commercial complex, or residential township draws water from somewhere — a borewell, a river, a municipal line, a tanker supply — and that raw water is almost never fit to use as-is. It carries turbidity, hardness, iron, bacteria, and dissolved salts that vary by season and source. A Water Treatment Plant (WTP)

If you’re setting up a Sewage Treatment Plant for a factory, commercial complex, or housing society, the first real decision isn’t the size of the plant — it’s the technology inside it. MBR, SBR, and MBBR all treat sewage biologically and can meet CPCB discharge norms, but they differ sharply in space needed, running cost,

If your bore well water leaves scale on fittings, tastes off, or keeps failing TDS specification, the fix in most cases is the same: a Reverse Osmosis (RO) plant. RO is the most widely used water treatment technology in India — used everywhere from household purifiers to multi-lakh-litre industrial systems — because it removes the

If your cooling tower is chewing through condenser tubes, losing heat transfer efficiency, or throwing up green slime on the fill media, the water circulating through it is almost certainly out of balance. Cooling towers concentrate whatever is in your makeup water — minerals, organics, microorganisms — cycle after cycle, until left untreated, they turn

A new pipework system looks clean. It isn’t. Every new installation carries residue from its own construction – silt, sand, mill scale, iron oxide, welding slag, and construction debris that gets left behind inside pipes, headers, and heat exchangers no matter how carefully the system was built. If that debris is still in the system

Chemical dosing is the part of a water treatment plant that gets the least attention until it fails. Coagulants, antiscalants, corrosion inhibitors and biocides only work if they’re delivered in the right quantity, at the right point, at the right time. Get that wrong — even by a small margin — and the effects show

If you are setting up a new factory, expanding an existing plant, or installing a water treatment system in Gujarat, you need two critical approvals from the Gujarat Pollution Control Board (GPCB) before you can legally operate: the Consent to Establish (CTE) and the Consent to Operate (CTO). Missing either of these is not just

What is Zero Liquid Discharge (ZLD)? Zero Liquid Discharge (ZLD) is an advanced wastewater treatment approach in which no liquid effluent is discharged outside the industrial facility. Instead, all process wastewater is treated, concentrated, and recycled — leaving behind only dry solid salts or sludge for disposal. The result: zero liquid waste leaves your premises.